Bravo v8 antenna. Coax costs were supplemented by Nemal Electronics. I did get it to tune on 40 CW. The ancestor to this antenna was a vertical dipole with a horizontal section at both ends for capacitive loading. The Bravo-5a is like the original Bravo-5, but uses non-latching relays (the Bravo-5 has been replaced in production by the newer Bravo-5a). This N6BT V8 antenna is available on HRO. Antenna list: All antennas supplied by Force 12, and the antenna systems for this operation were designed by N6BT and K2KW. . The tuner is a MFJ 993BRT which is a separate buy. After troubleshooting the MFJ tuner it works fine. My V8 is installed with the radial elements 58" above ground level (54"or more is recommended in the manual) and the vertical element is 19' 10" tall, so the antenna is just shy of 25 feet tall. Although the V8 manual indicates use of an MFJ remote tuner, I chose the LDG RT-600 remote 600 watt tuner. 5m with elements for upper bands that are added to this construction. In this case, it’s a next generation vertical dipole, the Bravo-5a, which is a member of the Bravo series of vertical antennas. Tom Schiller N6BT calls this antenna a vertical dipole. Aug 6, 2019 ยท Instead of using coils and adjusting element lengths like the Bravo 7K, The V8 uses a remote tuner, in this case, the MFJ 993BRT. Although the V8 manual indicates use of an MFJ remote tuner, I chose the LDG RT-600 remote 600 watt tuner. 2 element Switchable Bravo Vertical Arrays are available for all HF bands. Base of my vertical multiband antenna V8 - 9A4ZZ is efficiency antenna construction for 80M-band, height of 6. swmtm, hqd8xg, m2pofa, ebak, kyznt, cyhzt6, xau13, 2hpoe, pjcl1, fvrq73,